Firefighter PASS Device

TPASS® 5

Model: TPASS 5  |  Firefighter Emergency Signaling Pendant

The TPASS® 5 emergency signaling worker-worn pendant is the toughest Grace pendant, tested to 500°F with a silicon over-molded housing for the harshest environments. IP67 rated, intrinsically safe to UL913/CSA, and NFPA certified to 1970 (1982), 2025 Edition.

Request a Quote Custom pricing per deployment
Available to order · configured to your site

Need help speccing a system? Contact our team for guidance.

  • NFPA 1982 Certified
  • UL913/CSA Intrinsically Safe
  • Tested to 500°F
  • Silicon Over-Molded
  • IP67 Rated
  • Grace Cloud Connect® Compatible

Overview

The TPASS® 5 emergency signaling worker-worn pendant is the toughest Grace pendant, tested to 500°F with a silicon over-molded housing for the harshest fire ground environments. IP67 rated, intrinsically safe to UL913/CSA, and NFPA certified to 1970 (1982), 2025 Edition.

Factory default No-Motion timing is 30 seconds (NFPA compliance) with Pre-Alert approximately 12 seconds before full alarm. Pre-Alert prompts the user to move and reset the timer; once in full alarm, the user must press both side buttons simultaneously to reset. Fully compatible with Grace Cloud Connect® when used with a Grace Gateway. No-Motion timing programming via S5T5DLC-1 Data Download cable and software (sold separately).

Key Features

NFPA 1982 Certified

Meets NFPA 1970 (1982), 2025 Edition standards for firefighter PASS devices.

Intrinsically Safe (UL913/CSA)

Certified for hazardous-area use where ignition risk must be eliminated.

Tested to 500°F

Toughest Grace pendant, built for the harshest fire ground environments.

No-Motion + Pre-Alert

30-second NFPA-compliant default with 12-second pre-alert before full alarm.

Silicon Over-Molded IP67

Sealed silicon housing for water, dust, and impact protection.

Grace Cloud Connect®

Cloud-ready when paired with a Grace Gateway for fleet monitoring.

Build Your Unit

Configure the TPASS 5

Select the options for your deployment. These are the configurable settings programmed at the factory. Your selections are included when you request a quote, no payment required.

Heat Alarm An internal temperature sensor that can warn the user of a potential heat-stress condition and indicate the device is approaching an extended operational time of potentially dangerously high temperatures.
Power Mode Choose whether the device powers on automatically when removed from the charger, or requires the user to power it on and off manually.
GPS Adds a GPS module for precise location tracking. +$50
No-Motion Alarm Time Sets how long the device must remain still before entering an alarm state. (Non-default option +$50)
Your configuration · Part Number: Loading…
Request a Quote No payment taken · we'll confirm pricing and lead time

Specifications

ModelTPASS 5
CategoryFirefighter Emergency Signaling PASS Device
NFPA Certification1970 (1982), 2025 Edition
Intrinsic SafetyUL913 / CSA
Ingress ProtectionIP67 (dust-tight, water-resistant)
Heat RatingTested to 500°F
HousingSilicon over-molded
DetectionNo-Motion (30-sec NFPA default), Pre-Alert
OptionalHeat Alarm, GPS
CloudGrace Cloud Connect® compatible with Grace Gateway
ProgrammingVia S5T5DLC-1 cable + software (sold separately)